News Center
How do industrial casters need to check for faults?
Category:
FAQ
Author:
Source:
Release time:
2019-05-29
Visits:
1
Industrial casters are a kind of parts that are used in many industries. Its existence plays a very important role. Therefore, we must regularly troubleshoot industrial casters. The specific methods are as follows:
1. If the caster casters are loose or the wheels are stuck, the “freshing point” will be checked and repaired regularly. In particular, check the tightness of the bolts and the amount of lubricating oil. Replacing the damaged casters can enhance the rolling performance and rotation flexibility of the equipment.
2. Check if the wheel bearing is damaged. If the part is not damaged, it can be reassembled and continue to be used. If it is often encountered that the wheel is wrapped by debris, it is recommended to install the anti-cover to avoid it.
3. After checking the repaired wheels, make sure that the bolts and nuts are tightened. Use lock washers or locknuts on all bolts as much as possible. If the bolts are loose, tighten them immediately. If the wheels inside the brackets are loose, the wheels will be Damaged or unable to rotate.
4. Serious damage or slackening of rubber tires may lead to rolling instability, abnormal air leakage load and damage to the bottom plate, etc. Replacement of damaged tires and bearings in time can reduce the cost loss caused by the work of the casters.
5, regular inspection and maintenance regularly add lubricant to the casters and bearings, add lubricant in the place where friction is easy to occur until there is a little smashing, such as the wheel core, thrust washer, roller bearing roller surface, can reduce friction and rotation Flexible and more convenient.
Carrying capacity: Determine the light weight of the bearing, the size of the wheel, and also affect the rotation of the industrial casters. The ball bearing is suitable for the heavier bearing requirements of 180 kg or more.
Use site conditions: Choose a wheel that is large enough to accommodate the cracks in the scene. Also consider the use of road size, obstacles and other factors.
Special environment: Each round adapts to different working environments and chooses to adapt to special environments. For example, traditional rubber can't resist acid oil and chemicals. If you want to apply different special environments, Keshun high-tech polyurethane rubber wheel, plastic wheel, modified Bakelite rubber wheel and steel wheel are a good choice.
Rotational flexibility: The bigger the wheel is, the more labor-saving it is. The ball bearing can carry heavier loads, and the ball bearing rotates more flexibly but with lighter load.
Temperature Limits: Extreme cold and heat can cause trouble for many wheels. If the casters use Koshun's special green grease, the casters can be used at temperatures from -40 ° C to 165 ° C.
Key words:
industrial,caster,wheel,bearing,wheel,loading,capacity,rotating,environment,high,temperature,caster,phelico,caster,castor,caster,wheel
Address：D Building of Dashiling Industrial Park, Longgan g District, Shenzhen, Longdong Community, Baolong Street Shiyan town,Bao'an district, Shenzhen,Guangdong,China
Tel : +86 755 2815 8929
VIP Customer Line: +86 133 1691 1708
Website: www.dlpocasters.com
Email: qzdali@188.com